Xerox Support Articles

Xerox Phaser 3500 Printer Repair Tips for the Jam At Top (Jam 1)

Resolving the Xerox Phaser 3500 Jam At Top Error Message. Read below to figure out how to fix the Jam at Top error message on your Xerox Phaser 3500 Printer. Action and QuestionsYesNo 1. 1. Clean the paper path of any obstructions, dirt or ...

Xerox Phaser 3500 Jam At Tray Troubleshooting Tips and Repair

Resolving the Jam at Tray Error on your Xerox Phaser 3500 Printer. Jam At Tray (JAM 0) The leading edge of the paper doesn’t pass the registration sensor or the sensor does not turn ON. ■ After paper pick, paper is not fed. ■ After paper pick, ...

Troubleshooting Jam at Scanner (Pickup Jam) on the Xerox 6180 MFP

How to fix the Jam At Scanner error on the Xerox 6180 MFP Chain Link 005-110 Jam at Scanner (Pickup Jam) 1. Check the original document. Make sure it meets ADF requirements. Also make sure it's not creased or edges are folded. 2. Make sure ...

Jam at Tray 2 (Illegal Settings) on the Xerox 6180 MFP, Printer Repair

Troubleshooting the Jam at Tray 2 error on the Xerox 6180 MFP The Jam at Tray 2 (illegal settings) error is caused by the registration sensor not being turned on within the specified time. When this happens the best things to try is first ...

Paper Jam 0 in the Xerox Workcentre 3220 and 3210

Fixing the Paper Jam 0 in the Xerox Workcentre 3220 and 3210 Probably the most common error in the Xerox Workcentre 3220 and 3210 machines is the paper jam 0 error message. When the paper fails to reach the feed sensor in time tha machine produces ...

Xerox Workcentre MFP 3210 and 3220 Error Code List

Error Code List to Help Solve Problems related to the Xerox Workcentre 3210 and 3220 Machines Below is an error code list of the most common problems related to the Xeox Workcentre 3210 and 3220 office equipment. This list just gives you a brief ...

Changing the Date and Time on the Xerox Phaser MFP 3300

Setting the Date and Time on your Xerox Phaser MFP 3300 One of the main questions I get from customers is how to set the date and time on their fax machines. Or I guess one of the main things I see is machines with the wrong settings on the ...

Changing the Display Language on a Xerox Phaser MFP 3300

How to change the language setting on you Xerox Phaser MFP 3300 I don't get asked very often how to change the language on a machine but it does happen. On a lot of machines you have to get into a service mode to change the language to avoid ...