How to change the language setting on you Xerox Phaser MFP 3300
I don't get asked very often how to change the language on a machine but it does happen. On a lot of machines you have to get into a service mode to change the language to avoid ...
Diagnostic Aids in Troubleshooting the No Toner problem in the Brother 8480 and 8890
The No toner problem sounds like a pretty straight forward problem. Just replace the toner cartridge right? Yes that is the first think I would check ...
Troubleshooting the Print Unable 36 error on the Brother MFC 8480 and 8890
The Print Unable 36 error is related to the HVPS PCB failure during standby. The best thing to do is to turn the machine off and unplug everything from the back. Let the ...
Diagnosing the Print Unable 35 error on the Brother 8480 and 8890 MFC
Alright the Print Unable 35 error is a pretty straight forward error according to the service manual because they say very little about the error except to replace the Main PCB ...
How to diagnose the Print Unable 24 Error on the Brother MFC 8480 and 8890
The Print Unable 24 error is related to the internal temperature sensor error. With any temperature error the first thing to do is make sure your environment is the right ...
Fixing the Error Code 1F and Too Many Trays message on the Brother 8480 and 8890
It would be nice to add more trays to these machines. Unfortunately when these machinewere designed Brother had no idea how popular and waht workhorses they would be. ...
How to resolve the Error Code 1E, Drum End Soon message on the Brother MFC 8480 and 8890
Drum units on these machines are rated between 20,000 and 25,000 copies or prints. I always tell customers as long as you're using OEM toner cartridges and ...
How to change your Brother MFC 8120 and 8220's Ring Delay
I like to set the ring delay on most fax machines to 0 or 1. It use to be you could set these up to 7 or 9 rings before the machine would pick up. This led to several problems with machines ...
How to Adjust you LCD Contrast Lighter or Darker for the Brother MFC 8120 and 8220
Again, the LCD Contrast not a very common issue I'm presented with. But as with everything else I get questions with for every feature they have on these machines ...
How to change the sleep mode time setting on the Brother MFC 8120 and 8220
I get asked how to adjust the time in which it goes into sleep mode every once in a while. At default the machine goes into sleep mode after 5 minutes. When the machine ...
